Postavímedům 775 654 443

Timber frame or masonry house

This question has no universal answer, because the two ways of building are good at different things. It makes sense to decide on how soon you want to move in, how the house will be heated and ventilated, and what you are willing to supervise during construction.

A timber house with ventilated cladding of weathered timber
Ventilated timber cladding. Silvering is a natural change of the surface, not a defect.

A comparison of what people actually care about

Timber frame against masonry. Without figures, because the actual values depend on the assembly and on the standard you build to.
AspectTimber frameMasonry
Build timeShorter. The structure is assembled from kiln-dried timber, with no curing or drying out to wait for.Longer. Wet trades need time, warmth and a fixed order.
Building in winterEasier, there are few wet trades. The foundations stay seasonal work.Limited; masonry and render have temperature limits.
Thermal massLower in the structure. The house warms up quickly and cools down quickly. Compensated with a heavy floor and window shading.Higher. Mass holds temperature and softens summer overheating.
Wall thicknessUsually thinner for the same thermal resistance, because the insulation sits inside the structure rather than on it.Usually thicker; insulation is added to the load-bearing layer.
MoistureDetermined by the vapour design and the airtight layer. Timber that can dry out is stable.Copes better with a one-off leak, but has to dry out construction moisture afterwards.
AcousticsHas to be designed: separated structures, heavy layers and resilient fixings.Mass helps by itself; lightweight partitions behave like timber ones.
Changes laterEasier. A partition or a pipe run moves without demolition.Harder; working in masonry is a wet process.
LifespanSet by protection from moisture and by maintaining the details, not by the material itself.Also set by moisture, mainly rising damp and the state of the damp proofing.
When it fitsMoving in soon, a low energy standard, poor site access, a lightweight structure on piers.A heavy house, heavy structures, a slower pace, a requirement for high thermal mass.

What to ask about specifically for timber

With a masonry house most questions revolve around insulation and damp in the walls. With a timber frame house a different set of things is critical. Go through them with the company before you sign:

  • Which assembly and whyVapour-open or vapour-closed, and what the choice is based on.
  • Who provides airtightness and howWhich layer forms it and whether it will be measured.
  • How the timber is protected during constructionThe structure should not stay wet for long. Covering and pace are part of quality.
  • How penetrations are solvedServices in a service cavity, not through the airtight layer.
  • How shading is designedA lightweight structure without shading overheats faster than masonry in summer.

Frequently asked questions

Does a timber frame house burn more easily than masonry?

Fire safety is assessed under the same rules for both, and a timber frame house has to meet them just as a masonry one does. Behaviour in a fire is handled through linings, separation distances and separating structures, not by the material as such. The fire safety report is part of the design, so have it explained to you.

Is it hard to insure or mortgage a timber frame house?

Normally no; timber frame houses are insured and financed routinely. Conditions do differ between institutions and may depend on the structural system and on the documentation. We recommend checking that before you sign the building contract, not during construction.

Can a timber frame house be insulated or extended later?

Insulated yes, but it has to match the type of assembly: you cannot add a layer of high vapour resistance to a vapour-open wall. An extension upwards depends on the structure and the foundations, so a structural engineer assesses it from the as-built documentation. One more reason to keep it.

Send us your brief

The more specific the brief, the more specific the answer. It helps to know whether you already have a design, what state the plot is in, and whether you want a turnkey house or only the shell.

We pass your enquiry to a building company that works in your area. If we have none there, we say so straight away instead of leaving you waiting.

Prefer to call? 775 654 443

Only the e-mail is required. The more you write, the more specific our answer is.